Search
Confirm
Cancel
News
Worldbase Refrigeration provides you with fresh information
Current position:
Home
/
/
/
How to install customized Block Ice Machine?

Related News

How to install customized Block Ice Machine?

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-09-09
  • Views:0

(Summary description)The customized Block Ice Machine is a type of ice maker. The ice cubes produced are the largest in ice products, and have a small contact area with the outside world and are not easy to melt. It can be crushed into various forms of ice cubes according to different requirements. It is suitable for ice sculpture, ice storage, sea transportation, sea fishing, etc.

How to install customized Block Ice Machine?

(Summary description)The customized Block Ice Machine is a type of ice maker. The ice cubes produced are the largest in ice products, and have a small contact area with the outside world and are not easy to melt. It can be crushed into various forms of ice cubes according to different requirements. It is suitable for ice sculpture, ice storage, sea transportation, sea fishing, etc.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-09-09
  • Views:0
Information

The customized Block Ice Machine is a type of ice maker. The ice cubes produced are the largest in ice products, and have a small contact area with the outside world and are not easy to melt. It can be crushed into various forms of ice cubes according to different requirements. It is suitable for ice sculpture, ice storage, sea transportation, sea fishing, etc. So do you know how to install customized Block Ice Machine? Let's take a look at it briefly!
1. Placement of customized Block Ice Machine
1. The machine should be placed in a ventilated, safe and clean place around.
2. The machine should not be placed in the open air, and should not be exposed to direct sunlight and rain. The surrounding area should not be close to the heat source.
3. The operating environment of the machine cannot be lower than 5℃ and not higher than 38℃.
4. There should be enough space around the machine, especially the rear side should not be less than 150mm. So that the machine can dissipate heat.
5. Please adjust the anchor bolts at the bottom of the machine to ensure that the machine is placed horizontally and stably.


2. Installation of water system
1. Please connect to a water source that meets local drinking water standards.
2. Connect the filter when necessary to improve the drinking standard of the water.
3. The water supply system needs to meet the following conditions: the minimum water temperature is 2℃, and the maximum does not exceed 38℃. The lowest water pressure is 0.02Mpa and the highest is 0.8Mpa.
Third, the installation of the power supply
1. The power supply must be the same as that indicated on the nameplate of the machine.
2. All lines need to comply with national standards.
3. Reliable grounding is required, and the grounding wire needs to comply with electrical standards.
4. The voltage fluctuation shall not exceed ±10% of the rated voltage.
The above is an introduction to the installation method of the customized Block Ice Machine.

Keyword:

Scan the QR code to read on your phone

Follow Us

Follow Us

More exciting waiting for you!

ADD: Xingdong, Nantong, Jiangsu Province, China

Tel: +86-513-6838261068382616

Fax: +86-513-68382601

E-mail(sales): info@worldbase.cn

Copyright © 2020 Nantong Worldbase Refrigeration Equipment Co.,Ltd.  All rights reserved.  苏ICP备11079702号-1