Heat Treatment Furnace customized Water Chiller_Nantong Worldbase Refrigeration Equipment Co.,Ltd.

Heat Treatment Furnace customized Water Chiller

Date:

2022-05-23

The customized Water Chiller of the heat treatment furnace includes a frame, a linear motor and a water pump. Several sets of rollers are arranged inside the frame through the rotation of the shaft. The inner walls of both ends of the frame are provided with chutes, and the inner sliding of the two sets of chutes is set There are skateboards.

Heat Treatment Furnace customized Water Chiller

The customized Water Chiller of the heat treatment furnace includes a frame, a linear motor and a water pump. Several sets of rollers are arranged inside the frame through the rotation of the shaft. The inner walls of both ends of the frame are provided with chutes, and the inner sliding of the two sets of chutes is set There are slide plates, mounting brackets are fixedly installed at the edges of the top of the rack, and a magnetic shaft is fixedly installed between the two sets of mounting brackets. The water source is poured into the chiller for cooling, and then flows into the water storage tank through the third water pipe, and then It is extracted by the water pump in the water storage tank, and reaches the nozzle through the second water pipe for spray cooling. At the same time, the workpiece should be placed on the roller for water cooling treatment. After cooling, it flows into the water storage cavity at the bottom of the frame, and then passes through the filter screen After filtering, it flows into the chiller again. This cycle avoids the traditional waste of water resources. The rollers are provided to facilitate the processing of long workpieces. The sliding plates on both sides prevent the water from spraying out when the nozzle is cooled.

The above is a brief introduction to the relevant knowledge of the customized Water Chiller of the heat treatment furnace.

中文

English