Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Installation precautions for customized Blast Freezer products
Date:
2021-11-04
Should be placed in a well-ventilated place, if the customized Blast Freezer products remain level. This is not only for safety, but also allows customized Blast Freezer products to work smoothly, reducing vibration and noise.
Do you know what the installation precautions for customized Blast Freezer products are? Let's take a look at it briefly!
1. It should be placed in a place far away from heat sources and not exposed to direct sunlight. Because of the need for heat exchange with the outside world during work, the heat is dissipated to the outside through the condenser. The higher the outside environment temperature, the slower the heat dissipation, which will cause refrigerators and quick-freeze cabinets. The longer the working time, the higher the power consumption and the poorer cooling effect.
2. It should be placed in a place with low humidity to avoid condensation on the surface of the quick-freezer, which will affect the performance of electrical appliances.
3. It should be placed in a well-ventilated place, if the customized Blast Freezer products remain level. This is not only for safety, but also allows customized Blast Freezer products to work smoothly, reducing vibration and noise.
4. It should not be placed in an environment with flammable, explosive and corrosive materials. At the same time, do not place such items inside.
In summary, it is a brief introduction to the relevant knowledge about the installation precautions of customized Blast Freezer products.
Specializing in the engineering design of quick freezing equipment, refrigeration equipment and supporting refrigeration systems
Worldbase Refrigeration
ADD: Xingdong, Nantong, Jiangsu Province, China
Tel: +86-513-68382611, 68382616, 68382600
Fax: +86-513-68382601
E-mail(sales): info@worldbase.cn
Copyright © 2022 Nantong Worldbase Refrigeration Equipment Co.,Ltd.