Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Parts of Flake Ice Machine in china
Date:
2021-09-26
Expansion valve: installed between the liquid storage tank and the evaporator, the function of the cut-off point between the high-pressure and low-pressure areas is to throttle the high-pressure liquid to the low-pressure liquid.
During the normal ice making process of Flake Ice Machine in China, the main components of the entire equipment are condenser, compressor, expansion valve, evaporator, etc. Let's take a look at the relevant knowledge of Flake Ice Machine in china!
Expansion valve: installed between the liquid storage tank and the evaporator, the function of the cut-off point between the high-pressure and low-pressure areas is to throttle the high-pressure liquid to the low-pressure liquid.
Condenser: In the refrigeration process, the heat output of the condenser and the role of condensing refrigerant. After the high-pressure superheated steam discharged from the refrigeration compressor enters the condenser, all the heat absorbed during the working process is transferred to the surrounding medium, from the evaporator and refrigeration The compressor absorbs heat and the pipeline high-pressure superheated steam is condensed back to liquid.
Compressor: The role of refrigerant gas compression and transportation in the refrigeration system. The low-pressure and low-temperature gas produced in the evaporator is sucked back and compressed into high-temperature and high-pressure gas and sent to the condenser. The compressor is the core component of the entire refrigeration system. The refrigerant The power source of compression is the input of electrical energy, the mechanical energy inhalation, compression, and the transmission of refrigerant vapor to drive the cycle.
Evaporator: The evaporator becomes an ice bucket, and the water enters the evaporator spray pipe to evenly disperse the water on the inner wall of the evaporator to form a water film. The water film exchanges with the refrigerant in the evaporator pipe, and the temperature drops rapidly on the inner wall of the evaporator. A thin layer of ice is formed, and under the pressure of the ice blade, the film is broken into ice flakes and falls into the ice storage.
The above is an introduction to the parts-related knowledge of Flake Ice Machine in china.
Specializing in the engineering design of quick freezing equipment, refrigeration equipment and supporting refrigeration systems
Worldbase Refrigeration
ADD: Xingdong, Nantong, Jiangsu Province, China
Tel: +86-513-68382611, 68382616, 68382600
Fax: +86-513-68382601
E-mail(sales): info@worldbase.cn
Copyright © 2022 Nantong Worldbase Refrigeration Equipment Co.,Ltd.