The characteristics of drum skinning machine and the solution when it is damaged-Nantong Worldbase Refrigeration Equipment Co.,Ltd.

info@worldbase.cn

+86-513-68382616

language

English

The characteristics of drum skinning machine and the solution when it is damaged

Date:

2021-01-22

Drum skinning machine is a new generation of high-efficiency wood peeling product developed by our factory. The machine uses the unique force generated by the rotor with peeling teeth. Drum skinning machine, as the name implies, has two sets of peeling teeth rotors, drum skinning machine Higher efficiency, faster speed and higher output. Make the wood section cyclically move around the inside of the silo trough, and also make a rotary motion and irregularly jump around the wood section's own axis. At this point, the wood section and the teeth, the wood section and the wood section, and the wood section and the bin are constantly rubbing, impacting, squeezing, and the bark is quickly separated, achieving an efficient peeling effect.

Features of drum skinning machine: It adopts an open silo, which can feed in from one end and discharge at the other end. It overcomes the shortcomings of the existing drum skinning machine for feeding, discharging, and segmented work. efficient. Due to the impact of the teeth on the wood section, the wood section not only circulates in the casing, but also revolves around itself, so the peeling efficiency is high. It has good peeling effect on eucalyptus, poplar and other difficult-to-peel tree species, with a clarity of more than 95%.

It has strong adaptability to wood, and can peel off wood sections of different tree species, diameters, lengths and shapes. Because the wood sections make rotary motion and irregular beating, the concave part of the curved wood section can also be in good contact with the peeling teeth . Therefore, the stripping rate of curved logs is much higher than other drum types. Because the huge casing is fixed, it consumes less energy, has a low failure rate, and has a small maintenance workload. The vibration and noise are much lower than that of the drum skinning machine. The machine can be produced on the ground, and it is easy to use.

The scope of application of drum skinning machine: suitable for peeling freshly cut coniferous wood and some hardwoods, and also for peeling some frozen wood and dry wood.

Main application of drum skinning machine: This series of roller peeler is widely used in MDF mills, paper mills, veneer peeling mills, wood chip mills, pulp mills, wood storage plants, forest farms, etc. It has a wide range of applications and has a very good effect on popular wood species such as eucalyptus and poplar. It is a supporting equipment suitable for assembly line operations and automated production. Among them, the 13-meter trough drum skinning machine is a new type of wood peeling equipment with high efficiency, high yield and high quality independently developed by our company according to the needs of market development. It is an indispensable tool for automated production lines.

The place where drum skinning machine is prone to damage:

1. A common problem is the problem of the V-belt of the drum skinning machine. The V-belt will be too tight or too loose after a long time of use, which affects the use of the whole machine, especially the V-belt slips on the production line of the drum skinning machine. There is no way to drive for processing, so the entire production line has to stop, which will bring you great negative benefits；

2. Adjusting the tightness of the V-belt of the drum peeler. When the V-belt is too tight, the motor bearing heats up. When it is too loose, the speed will decrease and the V-belt will also slip easily, which will affect the service life. When adjusting the tension of the V-belt, loosen the bolt that fixes the motor seat, use the adjusting bolt to change the position of the motor on the slide, and then tighten the fixing bolt after the V-belt reaches the required tightness.

3. Oil stains appear on the drum peeler. Many people do not pay attention to the oil stains of the drum skinning machine, thinking that the oil stains are not important. In fact, this is not the case. It is precisely these oil stains that greatly affect the efficiency of the debarker. If the drum peeler has oil stains, it will have a great impact on production efficiency and damage the equipment, so check whether all fasteners are fastened. If it is found that the belt of the drum peeler is damaged, it should be replaced in time. Check whether the transmission belt is installed correctly and in good condition. When there is oil on the belt or sheave, wipe it off with a clean cloth in time.

中文

English