Water Chiller Manufacturers china


Date:

2022-05-09

Shaft parts, Water Chiller Manufacturers china, mainly include a base, a frame foot, a lower bearing frame welded on the upper end of the frame foot, and an upper cover frame hinged on the lower bearing frame; the upper cover frame and the lower bearing frame are hollow-shaped and both The cross-sections are all semi-circles arranged in circles;

Water Chiller Manufacturers china

Shaft parts, Water Chiller Manufacturers china, mainly include a base, a frame foot, a lower bearing frame welded on the upper end of the frame foot, and an upper cover frame hinged on the lower bearing frame; the upper cover frame and the lower bearing frame are hollow-shaped and both The cross-sections are all semi-circles arranged in a circle; both ends of the front of the base are provided with side extension plates, and the side extension plates are installed with ball screws in the horizontal direction through screw sleeve installation and fixed installation. , The guide rod and the ball screw are connected with a translation stage which is slidably connected to the guide rod. The rear end of the translation stage is hingedly installed along the horizontal direction, and the front end of the translation stage is fixed with a control cylinder; A cable connecting the two. The utility model has a simple structure and ensures the comprehensiveness and uniformity of water spraying on the shaft parts, thereby improving the cooling speed and efficiency. The surface of the parts is oxidized.


The above is a brief introduction to the relevant knowledge about shaft parts Water Chiller Manufacturers china.